KS压力传感器
量程范围：1至1000 Bar
标准输出信号：0...10VDC(3线)/4...20 mA(2线)
小尺寸KS压力传感器
不锈钢防潮部件KS压力传感器
SIL2 认证KS压力传感器
KS压力传感器基于放在不锈钢膜片上的薄膜敏感元件。KS压力传感器
由于最新的SMD电子元件和紧凑设计,这些压力变送器坚固耐用和高度可靠,以SIL2认证作为标准。KS压力变送器适用于所有的工业应用, 特别针对液压领域 (压缩机,汞, 动力单元,移动液压系统,等等.) 同时适用于多种恶劣条件,通常可以抵抗高水平的冲击、振动、压力和温度峰值。
|
Output signal |
VOLTAGE |
CURRENT |
|
Non Linearity (BFSL) |
± 0.15% FS (typ) ± 0.25% FS (max) |
|
Hysteresis |
+ 0.1% FS (typ) + 0.15% FS (max) |
|
Repeatability |
± 0.025% FS (typ) ± 0.05% FS (max) |
|
Zero offset tolerance |
± 0.15% FS (typ) ± 0.25% FS (max) |
|
Span offset tolarance |
± 0.15% FS (typ) ± 0.25% FS (max) |
|
Accuracy at room temperature (1) |
< ± 0.5% FS |
|
Pressure ranges (2) |
From 1 bar to 1000 bar (See table) |
|
Resolution |
Infinite |
|
Overpressure (without degrading performance) |
See table |
|
Pressure containment (burst test) |
See table |
|
Pressure Media |
Fluids compatible with Stainless Steel AISI 430F and 17-4 PH |
|
Housing |
Stainless Steel AISI 304 |
|
Power supply |
15...30Vdc |
10...30Vdc |
|
Dielectric strenght |
250 Vdc |
|
Zero output signal |
0 V (N); 0.1 V (C) |
4 mA (E) |
|
Full scale output signal |
10 V (N); 10.1 V (C) |
20 mA (E) |
|
Allowed load |
≥ 5KΩ |
see load diagram |
|
Long term stability |
< 0.2% FS/per year |
|
Operating temperature range (process) |
-40...+125°C (-40...+257°F) |
|
Operating temperature range (ambient) |
-40...+105°C (-40...+221°F) |
|
Compensated temperature range |
-20...+85°C (-4...+185°F) |
|
Storage temperature range |
-40...+125°C (-40...+257°F) |
|
Temperature effects over compensated range (zero) |
± 0.01% FS/°C typ. (± 0.02% FS/°C max.) |
|
Temperature effects over compensated range (span) |
± 0.01% FS/°C typ. (± 0.02% FS/°C max.) |
|
Response time (10...90%FSO) |
< 1 msec. |
|
Warm-up time (3) |
< 30 sec. |
|
Mounting position effects |
Negligible |
|
Humidity |
Fino a 100%RH non-condensing |
|
Weight |
80-120 gr. nominal |
|
Mechanical shock |
100g/11msec according to IEC 60068-2-27 |
|
Vibrations |
20g max at 10...2000 Hz according to IEC 60068-2-6 |
|
Ingress protection |
IP65/IP67 |
|
Output short circuit and reverse polarity protection |
YES |
|
CE Conformity |
According to EC Directive 2004/108/CE |
|
FS = Full scale
1 Incl. Non-Linearity, Hysteresis, Repeatability, Zero-offset and Span-offset (acc. to IEC 61298-2)
2 The operating pressure range is intended from 0.5% to 100% FS
3 Time within which the rated performance is achieved |
| 产品选型 |
|
|
|
|
|
|
|
信号输出 |
|
|
C 0.1...10.1 Vdc |
|
E 4...20 mA |
|
N * 0...10 Vdc |
|
| |
PRESSURE CONNECTION |
|
|
| |
E (DIN 3852-E) |
|
| |
3 G1/2 gas male (DIN 3852-E) |
|
| |
| |
C DIN (P8) |
|
|
| |
| |
Z 4 pin connector M12x1 |
|
| |
| |
4-pin connector DIN |
|
| |
| |
| |
MEASUREMENT RANGE RANGE |
|
|
| |
| |
| |
bar barbar bar |
|
| |
| |
| |
B01U 1* B04D 401* B04D 40 |
|
| |
| |
| |
B1V6 1.6* B06D 601.6* B06D 60 |
|
| |
| |
| |
B02U 2* B01C 1002* B01C 100 |
|
| |
| |
| |
B2V5 2.5* B16D 1602.5* B16D 160 |
|
| |
| |
| |
B04U 4* B02C 2004* B02C 200 |
|
| |
| |
| |
B06U 6* B25D 2506* B25D 250 |
|
| |
| |
| |
B01D 10 B04C 40010 B04C 400 |
|
| |
| |
| |
B16U 16 B06C 60016 B06C 600 |
|
| |
| |
| |
B02D 20 B01M 100020 B01M 1000 |
|
| |
| |
| |
B25U 25 25 |
|
| |
| |
| |
* SIL certification not available |
|
| |
| |
| |
| |
ACCURACY |
|
|
| |
| |
| |
| |
M ±0.5%FS |
|
| |
| |
| |
| |
| |
RESPONSE TIME |
|
|
| |
| |
| |
| |
| |
V Fast (< 1 msec) |
|
| |
| |
| |
| |
| |
| |
Mechanical and/or electrical characte- ristics differing from standard may be arranged on request. |
| KS |
E |
3 |
C |
B02D |
M |
V |
|
|
Instruments manufactured by Gefran are calibrated against precision pressure calibration equipment wich is traceable to International Standards. |
|
|
Ex: KS - E - E - C - B04C - M - V
Pressure transmitter KS with 4 to 20 mA output signal, G1/4 male (DIN 3852-E) pressure connection, microDIN electrical connector, 0...400 bar pressure range, ± 0.50% FS accuracy, 1 msec response time.
Sensors are manufactured in compliance with: - EMC 2004/108/CE Compatibility Directive
- RoHS 2002/95/CE Directive
- 2006/42/CE Machinery Directive |
TPS压力变送器
量程：从0...10 bar到0...1000 bar
（从0...150psi to 0...15000psi)
准确度：± 0.15% FSO 典型
防护等级：IP65/IP67
防湿部件17-4PH
温度范围：-40...+120°C
TPS系列变送器基于应变片粘合在不锈钢上的技术。
创新的机械结构使传感器在安装中对拧紧完全不敏感。
此传感器适合用于坚固性，可靠性和有高精度要求的应用场合。
| 产品选型 |
PRESSURE CONNECTION |
|
|
|
|
|
|
ELECTRICAL CONNECTION |
|
|
Standard |
|
G 1/4 gas male |
1 |
4-pole connector solenoid |
E * |
|
On request |
shielded cable |
F |
|
7/16-20 UNF-2A male (SAE 4 for AS4395-E) |
2 |
4-pole connector |
Z * |
|
|
G 1/2A (DIN 16288) |
3 |
4-pole connector microsolenoid |
M * |
|
G 1/4 gas female |
4 |
7 pole connector |
P |
|
1/8-27 NPT female |
5 |
6 pole connector |
V |
|
|
1/4-18 NPT female |
6 |
|
| |
|
1/4-18 NPT male |
7 |
|
| |
|
M14 x 1.5 male |
8 |
|
| |
B01D B16U B02D C C |
|
|
1/8-27 NPT male |
9 |
|
| |
B25B25U B03D B35U DB25B25U B03D B35U D |
|
G 1/4 male (DIN 3852-E) |
E |
|
| |
B35D B04C B05CMB35D B04C B05CM |
| <, /TD>
| M12 x 1.5 male |
R |
|
| |
P15D P25D P03CP15D P25D P03C |
|
7/16-20 UNF-2A male (SAE 4 for J1926-2) (*) |
K |
|
| |
P05C P75DP05C P75D |
|
7/16-20 UNF-2A female
(SAE 4) |
F |
|
| |
P01M P15CCP01M P15CC |
|
|
| |
|
| |
P10M P15MP10M P15M |
|
|
| |
|
| |
P02M P25C |
|
|
| |
|
| |
P03M P04M |
|
|
| |
|
| |
P05M P75C |
|
|
| |
|
| |
B06C B07C B01M |
|
|
| |
|
| |
B04D B05D B06D |
|
|
| |
|
| |
B01C B16D B02CD |
|
|
| |
|
| |
| |
ACCURACY |
±0.15% FSO typical >200bar/3000psi |
|
|
| |
|
| |
| |
T |
|
|
| |
|
| |
| |
|
±0.25% FSO typical ≤200bar/3000psi |
|
|
| |
|
| |
| |
| |
Mechanical and/or electrical characte- ristics differing from standard may be arranged on request. |
| TPS |
|
1 |
|
E |
B01D |
T |
|
Ex.: TPS - 4 - V - B07C - T
Pressure transducer TPS with G 1/4 female process connection, 6 pole connector, 0...700 bar measurement range,
± 0.15% FSO accuracy.
|
Accuracy (1) |
± 0.15% FSO typical; ± 0.2% FSO max >200bar/3000psi
± 0.25% FSO typical; ± 0.5% FSO max ≤200bar/3000psi |
|
Resolution |
Infinite |
|
Overpressure (without degrading performance) (2) |
See table |
|
Pressure containment (Burst test) (3) |
See table |
|
Wetted parts |
Fluid compatible with INOX 17-4PH Stainless Steel |
|
Body mate, rials |
INOX AISI 304 Stainless Steel and Nylon 66GF35V0 |
|
Power supply |
10 (max 15) Vdc/ac RMS |
|
Common mode voltage |
Typical 5V @ 10V supply |
|
Output impedance |
350 Ω (± 1) |
|
Load impedance |
> 1000 KΩ |
|
Insulation resistance |
> 1000 MΩ @ 50Volt |
|
Zero offset and span setting |
± 0.5% FSO |
|
Output voltage (sensitivity) |
10...40bar / 150...500psi 1,5mV/V
50...60bar / 750...1000psi 2mV/V
100...1000bar / 1500...15000psi 3mV/V |
|
Long term stability |
< 0.1% FSO per year |
|
Operating temperature range (process) (5) |
-40...+120°C (-40...+248°F), |
|
Compensated temperature range (4) |
-20...+85°C (-4...+185°F) |
|
Storage temperature range |
-40...+125°C (-40...+257°F) |
|
Temperature effects over compensated range (zero-span) |
± 0.01% FSO/°C typical (± 0.02% FSO/°C max.) |
|
Mounting position effects |
Negligible |
|
Humidity |
Up to 100% RH non condensing |
|
Weight |
130 gr. nominal |
|
Mechanical shock |
100 g / 11 msec. according to IEC 60068-2-27 |
|
Vibrations |
20 g max @ 10-2000Hz according to IEC 60068-2-6 |
|
Ingress protection |
IP65/IP66/IP67 |
FSO = Full Scale Output
1 Includes combined effects of Non-Linearity BFSL (Best Fit Straight Line), Hysteresis and Repeatability
2 tested for more than 1000 strokes with single duration < 2msec.
3 tested for more than 100 strokes with single duration < 2msec.
4 temperature outside compensated range may cause zero signal drift
5 ambient and/or electronics part temperature must not exceed 105°C |
当前位置：
产品详细介绍